Bkfabworks Dodge Ram Track Bar Setup
This Kit Fits 94-02 Dodge Ram 1500 4WD & 94-02 Dodge Ram 2500/3500 4WD. Intended for Trucks With 2"- 6" Inches of Lift. We Have Tested This Kit with a Stock Truck with Leveling Kit ONLY. It Has Not Been Tested with A Factory Truck. We Can Also Custom Build These Kits to Work with Any Lift Height. Email Us If You Have Any Questions.
We Have Put Together Some of the Best Quality Parts to Make Our Kit Stand Out from the Rest! You Can Find Many Track Bar Setups Available for the Dodge Trucks, none compared To Our Kit!
This Kit Will Be the Last Track Bar Setup You Have to Purchase for Your 2nd Generation Dodge Truck.
- THIS IS A COMPLETE TRACK BAR SETUP. IT COMES WITH EVERYTHING NEEDED TO MOUNT THE KIT TO YOUR TRUCK.
- NEW UPPER BKFABWORKS FRAME MOUNT.
- NEW TRACK BAR.
- ALL HARDWARE/JOINTS NEEDED FOR INSTALLATION.
- VERY DETAILED INSTRUCTIONS (SOME DRILLING OF THE FACTORY TRACK BAR MOUNTING HOLE IS REQUIRED).
1.5 .250 Wall Dom Tubing Is Used for the Track Bar.
We Use Heat Treated Chromoly 7/8" Heim Joints Along with The Needed Spacers to Mount in Your Factory Axle Mounting Location.
All Grade 8 Hardware Is Included with The Kit.
By Using Right- And Left-Hand Threaded Joints You Are Able to Easily Adjust Your Axles Center Point. This Allows You to Adjust Your Front End by Hand Without Having to Unbolt Anything!
No Welding Required but You Will Need to Drill Holes to Bolt the Bracket Up. Trucks With Suspension Lifts Over 6" May Require Grinding the Stock Track Bar Mount for Needed Clearance.
This Kit Works Hand in Hand with Our Dodge Steering Setup but Will Work Great with Your Factory Steering Setup as Well!
With This Kit You Can Be Confident That You Will Never Have to Worry About Your Track Bar Setup Again!
These Kits Are Shipped Raw Steel, But We Can Have the Kit Powder Coated If Needed. Email Us for a Quote on Powder Coating.
Click Here for Installation Instructions!